Acela Monterra 6x6 Extreme Duty Chassis Mechanics Truck

22042381_10154623581497303_7141975603829221029_o.jpg
21992969_10154623580817303_2025286090238682451_o.jpg
22095858_10154623581437303_2608948740543595394_o.jpg
21992776_10154623580812303_2769481298232471330_o.jpg
22051257_10154623581187303_8131453777172253636_o.jpg
22136914_10154623580922303_7547568090790700865_o.jpg
22096069_10154623580917303_8718300518356603848_o.jpg
22042381_10154623581497303_7141975603829221029_o.jpg
21992969_10154623580817303_2025286090238682451_o.jpg
22095858_10154623581437303_2608948740543595394_o.jpg
21992776_10154623580812303_2769481298232471330_o.jpg
22051257_10154623581187303_8131453777172253636_o.jpg
22136914_10154623580922303_7547568090790700865_o.jpg
22096069_10154623580917303_8718300518356603848_o.jpg
sale

Acela Monterra 6x6 Extreme Duty Chassis Mechanics Truck

249,565.00 258,000.00

Acela Monterra 6x6 Extreme Duty Chassis,  7.2L Caterpillar 3126 diesel engine,  330 Horse Power,  860 ft-lb. torque,  Allison MD 3700 series transmission,  full time all wheel drive,  74mph maximum speed, 10k miles.

Brutus Body Features:

Body length – 190” + 24” workbench bumper
Body width – 98”
Cabinet height – 64”
Cabinet depth – 24”
Cabinet drop – For Acela 6x6
Cabinets – 12 gauge all welded steel
Main sills – 8” x 3” x 3/8” steel tubing
Cross sills – 3” x ¼” steel channel
Flooring – 3/16” smooth steel
Doors – 3/16” aluminum
Shelving – 1/8” aluminum with an infinitely adjustable track system
Hinges – Polished stainless steel
Handles – Polished stainless steel
Latching – 3-point stainless steel
Door retainers – Gas shocks
Cabinet venting – Bottom venturi’s with drain holes to remove moisture build-up
Door seals – Rubber bulb seals that are glued into a u-shaped moulding
Drip mouldings – Glue bonded aluminum gutters that channel water away from the doors
Interior lighting – Hamsar LED strip lighting with master switch
Exterior floodlights – Hamsar LED with master switch
Running Lights – Rubber mounted LED’s
Warranty – 3-year structural, 3-year limited paint, and 5-year paint fade
Paint protection – Endura Impact rubberized wheel wells, rear workbench bumper (all
surfaces), cargo bay walls and floor
-Anodized aluminum bonded to the upper and lower front cabinets with
vertical 45 degree deflector edges
-Anodized aluminum bonded to the cabinet rears
-Anodized aluminum edge protection bonded to the cabinet bottom
edges (DS#2, DS#5, PS#2, PS#5)
Body finish – Fully body worked for a smooth exterior with no seams or weld joints
Paint – White PPG polyurethane
Black PPG polyurethane on workbench rear doors

Brutus Body Specifications:

Driver side #1 – 34”H x 30”W x 24”D
1-Horizontal flip-up aluminum door with gas shocks
1-Adjustable aluminum shelf
1-Angled aluminum ceiling heat duct with round stainless vent plumbed to cargo bay
heater
1-LED perimeter strip lighting
1-Reinforced rooftop for Vanair Powerflex multifunction
1-Carr 24” wide work truck step (mounted to underside of battery box/air tanks)
*Cabinet located above driver side batteries and air tanks
Driver side #2 – 64”H x 24”W x 24”D
1-Bottom vertical aluminum door with gas shock and one horizontal flip-up aluminum
door with gas shocks
1-Brutus Signature Series aluminum drawer pack with 1-7”, 3-5”, 3-3” deep drawers and
top shelf. Each drawer has roller bearing sliders, stainless handle, and 4 adjustable
dividers (18” wide x 20” deep)
1-Vanair remote mounted control panel (mounted to back wall above shelf)
1-Elecbox electrical panel with switches for interior lights, driver side work lights,
passenger side work lights, and rear work lights (mounted to rear wall above shelf)
1-Angled aluminum ceiling heat duct with round stainless vent
1-LED perimeter strip lighting
1-Reinforced rooftop for Vanair Powerflex multifunction
1-Carr 24” wide work truck step (mounted to underside of cabinet)
Driver side #3 – 34”H x 56”W x 24”D
1-Horizontal flip-up aluminum door with gas shocks
1-Stainless flatbar with four hooks (mounted to upper front wall)
1-Brutus Signature Series aluminum bolt bin with 5” deep drawer and top shelf. Each
drawer has roller bearing sliders, stainless handle, and bolt dividers (48” wide x 20”
deep)
1-Adjustable aluminum shelf
1-Angled aluminum ceiling heat duct with round stainless vent
1-Reinforced rooftop for air tank
1-LED perimeter strip lighting
Driver side #4 – 34”H x 56”W x 24”D
1-Horizontal flip-up aluminum door with gas shocks
1-Stainless flatbar with four hooks (mounted to upper front wall)
1-Brutus Signature Series aluminum bolt bin with 5” deep drawer and top shelf. Each
drawer has roller bearing sliders, stainless handle, and bolt dividers (48” wide x 20”
deep)
1-Adjustable aluminum shelf
1-Angled aluminum ceiling heat duct with round stainless vent
1-LED perimeter strip lighting
Driver side #5 – 64”H x 24”W x 24”D
1-Bottom vertical aluminum door with gas shock and one horizontal flip-up aluminum
door with gas shocks
1-Brutus Signature Series aluminum drawer pack with 1-7”, 3-5”, 3-3” deep drawers and
top shelf. Each drawer has roller bearing sliders, stainless handle, and 4 adjustable
dividers (18” wide x 20” deep)
1-Adjustable aluminum shelf
1-Access hole in front wall to DS#4 heat duct
1-4” round return vent to cargo bay
1-LED perimeter strip lighting
1-Carr 24” wide work truck step (mounted to underside of cabinet)

Passenger side #1 – 34”H x 30”W x 24”D
1-Horizontal flip-up aluminum door with gas shocks
1-Adjustable aluminum shelf
1-Angled aluminum ceiling heat duct with round stainless vent plumbed to cargo bay
heater
1-Reinforce rooftop for chassis twin fan cooler system
1-LED perimeter strip lighting
*Cabinet located above passenger side fuel tank
Passenger side #2 – 64”H x 24”W x 24”D
1-Bottom vertical aluminum door with gas shock and one horizontal flip-up aluminum
door with gas shocks
2-Bottle holders with floor wear pad and aluminum channel bottle holder (front wall)
1-Coxx twin line gas reel (mounted to ceiling at rear wall)
2-Gear hooks (rear wall below gas reel)
1-Gauge holder (mounted vertically to rear wall between gas reel and door opening)
1-Alberta vent package with aluminum door louvers, ceiling vent, and floor vents
1-Angled aluminum ceiling heat duct (no vent)
1-Carr 24” wide work truck step (mounted to underside of cabinet)
Passenger side #3 – 34”H x 56”W x 24”D
1-Horizontal flip-up aluminum door with gas shocks
1-Stainless flatbar with four hooks (mounted to upper front wall)
1-Brutus Signature Series aluminum bolt bin with 5” deep drawer and top shelf. Each
drawer has roller bearing sliders, stainless handle, and bolt dividers (48” wide x 20”
deep)
1-Adjustable aluminum shelf
1-Angled aluminum ceiling heat duct with round stainless vent
1-LED perimeter strip lighting
Passenger side #4 – 34”H x 56”W x 24”D
1-Horizontal flip-up aluminum door with gas shocks
1-Stainless flatbar with four hooks (mounted to upper front wall)
1-Brutus Signature Series aluminum bolt bin with 5” deep drawer and top shelf. Each
drawer has roller bearing sliders, stainless handle, and bolt dividers (48” wide x 20”
deep)
1-Adjustable aluminum shelf
1-Angled aluminum ceiling heat duct with round stainless vent
1-4” round vent hole in wall to PS#5
1-4” round return vent to cargo bay
1-LED perimeter strip lighting
Passenger side #5 – 64”H x 24”W x 24”D
1-Vertical aluminum door with gas shock
1-Maxistab hydraulic stabilizer controls (mounted under shelf)
1-Aluminum shelf between horizontal crane supports
1-Graco 1/2” x 50’ spring rewind air reel with rear body access through stainless steel
door (mounted to top of shelf)
1-Crane reinforcement for Cobra 11000
1-LED perimeter strip lighting
1-Carr 24” wide work truck step (mounted to underside of cabinet)

Cargo bay – 190”D x 50”W x 34”H
1-Three piece sliding aluminum roof system with UHMW slider tracks, dual vertical
aluminum doors, and stainless latching
1-Webasto Air Top Evo 55 diesel air heater (mounted to
upper driver side wall an ducted to DS#1 and PS#1 cabinets)
1-Aluminum chain rack with rubber wall protection (driver side wall at tailgate)
2-Stainless flatbar each with 6 stainless hooks (upper driver side wall ahead of chain
rack)
1-Featherlite 6’ ladder with two aluminum ladder rack holders (driver side front wall
after stainless hooks)
1-LED strip lighting on upper driver side wall (full length)
1-Stainless steel 4 tube bar holder (passenger side wall)
1-Stainless flatbar with 6 stainless hooks (upper passenger side wall ahead of bar holders)
6-Zinc plated rotating d-ring tie downs
1-12” high x 50” wide tailgate with plastic covered drop cables, adjustable stainless steel
latches, stainless steel hinges, and grip tape
*Endura Impact on cargo bay floor and walls

Workbench bumper – 98”W x 24”D
1-14”H x 13”W x 98”D steel cabinet with aluminum doors
1-3/8” smooth steel top plate with rounded corners and 1 ½” clamping lip
1-Record 6” vise with black vinyl cover (mounted to passenger side)
1-Aluminum grab handle mounted from workbench to upper driver side rear cabinet
2-Sealed light boxes
1-Frame mounted 2” receiver hitch with 10,000 lb rating
2-Relocate two d-rings from truck frame to bottom of hitch plates
1-7” Expanded steel step bumper
1-STI rubber mounted step mounted to underside of step bumper on driver side
*Endura Impact on entire workbench cabinet except for side doors (smooth black)

Misc. features:

1-Smooth aluminum lightbar with two Grote 17” lo-profile amber LED beacon lights
(mounted to front roof w/dash switch)
3-Hamsar 2500 lumen LED worklights (driver side rooftop - front, center, rear)
3-Hamsar 2500 lumen LED worklights (passenger side rooftop - front, center, ahead of
crane)
2-Hamsar 2500 lumen LED worklights (upper rear cabinets)
1-8’ buggy whip with amber LED light, orange flag, aluminum hinge with stainless pin
latch, and rear body rubberized holder (PS front corner with dash switch)
2-Brutus mud flaps at front of wheel well
2-Brutus mud flaps at rear of wheel well

Multi-function system:

1-Vanair Powerflex AH
-25 hp Kubota diesel engine
-40 cfm @ 150 psi (30 cfm @ idle)
-10.5 gpm hydraulic piston pump (13 gpm @ 3,000 psi)
-47.6”L x 21”W x 33.4”H
1-Remote mounted control panel with 6’ tether (see DS#2)
1-Integral hydraulic supply tank with MA273856 12V DC 350W hydraulic tank heater
1-Plumb to chassis fuel tank
1-Plumb hydraulic system to crane and stabilizers
1-20 gallon air tank with auto drain water trap, liquid filled air gauge, and short hose with
drain valve for easier emptying of air tank (see DS#3 rooftop)
*System mounted on the DS#1 and DS#2 rooftop

Welder system:

1-Miller Trailblazer 325 (907512002)
-Kohler 25 HP EFI gas engine
-325A at 100% duty cycle
-12,000 Watt generator
-12/24V jump starter
-12 gallon fuel capacity
-33”H x 20”W x 40 ½”L
-460 lb weight
*System mounted on the DS#4 and DS#5 rooftop

Crane system:
1-Cobra 11000.3 RDH
Rating61,400 ft/lbs
Lift 11,020 lb @ 3’ - 2,110 lb @ 27’
Boom3 hydraulic
Weight2,030 lb
Cable115’ x 15/32”
RotationContinuous unlimited
Boom materialHexagonal Domex memory steel
ControllerWireless paddle style proportional speed
Crane comes with:
1-Aluminum crane rest with spring system, stow indicator, and rubber pad
1-Maxistab 7F-EHO/K hydraulic stabilizer system (power out/power up and down)
1-Engineer stamped crane certification with color stability chart

Chassis:

1-Webasto Thermo Top C diesel coolant heater with 7 day timer
1-Acela supplied back up camera system with rear body mounted camera and dash
mounted monitor (camera activates when unit is backing up)
1-Relocate chassis frame mounted fan coolers to passenger side #1 rooftop
1-Shorten driver side exhaust pipe and reconnect side hose
1-Lengthen truck frame and add a cross member

Pricing:

1-Acela Monterra 6x6 Extreme Duty Chassis
1-15’ 10” Brutus MSB190-64S steel and aluminum service body
1-Vanair Powerflex AH diesel multifunction system
1-Cobra 11000.3 RDH wireless hydraulic crane
1-Maxistab 7F-EHO/K hydraulic stabilizer system
1-Miller Trailblazer 325 welder/generator/jump starter

Add To Cart